| General parameters |
| Type |
ZENITH Q |
| Frequency band |
4, 6, 7, 8, 11, 13, 15, 18, 23, 26, 32, 38 GHz |
| Channel bandwidth |
3.5 – 112 MHz |
| Modulation scheme |
QPSK – 2048 QAM |
| Transmission capacity |
Up to 900 Mbps for 1+0 |
| Frequency stability |
< 10 ppm |
| Forward error correction FEC |
Reed-Salomon |
| System configurations |
1+0, 1+1 SD/FD, 2+0, XPIC |
| Radio Parameters |
| Output power max. |
up to +30 dBm |
| Automatic power control |
ATPC |
| ACM |
Hitless ACM |
| XPIC |
Yes |
| User interfaces |
| |
Up to 63 E1/T1 |
| |
3x Ethernet 1000 Base T, packet length up to 9728 bytes |
| |
Optional STM-1 pass through |
| Management |
| |
Built-in web-based GUI, Command line interface |
| |
SNMPv1, SNMPv2, SNMPv3 |
| Ethernet |
| |
MTU up to 9728 Bytes IEEE 802.1D-2004 IEEE 802.1Q-2003 IEEE 802.3ad |
| |
MEF 6, 9, 10.1, 11, 14 ITU-T Rec. G.8032 |
| |
QoS Port-based, 802.1Q VLAN TAG, DiffServ, four-level priority queue |
| |
SyncE/1588 |
| Antennas |
| Diameters |
0.3/0.6/0.9/1.2 m |
| Large diameter antennas |
Other producers, possible waveguide connection |
| Class |
ETSI Class 2 or 3 |
| Polarization |
Vertical or Horizontal |
| Power supply and Cabling |
| Power supply |
-39 - -60 VDC |
| Power consumption |
1+0 up to 90W, 1+1 and 2+0 up to 150W |
| IDU-ODU connection |
Coaxial cable 50 Ω, RG213 up to 140 m, RT50/20 up to 240 m, N-connector |
| Temperature range |
| Outdoor unit |
−35 up to +55 °C |
| Indoor unit |
–5 up to +50 °C |
| ODU / IDU Dimensions |
| Width × Height × Depth |
25.5 × 30.1 × 13.3 / 48.2 × 23.9 × 4.4 cm |
| Weight |
From 4.6 to 6.7 / from 2.7 to 3.4 kg |
